PMLN6530 Black 2 Wire earpiece

The PMLN6530 is a durable earpiece designed for all-day wear. It comes with a quick disconnect translucent tube in case the wire gets snagged or tugged. The clear tube makes this almost invisible while in the ear. This earpiece allows for discreet communication with your two-way radio for applicatons when a palm style receiver is too bulky. Comes with adjustable garment clip.

Normally ships the same day from our Chicago Illinois Warehouse.   

Works with: CP200D series radios 

Alternative Part Numbers:  PMLN6530A, PMLN6531B, PLMN6530C

Warranty:  1 Year

Headsets are used on a daily basis, most headsets take a lot of abuse. Since they are relatively fragile pieces of equipment, they can break easily if you don’t take care of them. Whether you use a corded headset at a computer or a wireless headset when using your cell phone, there are some things you can do to prevent excessive wear and damage.

Prevent Damage to Your Headset

• Don’t leave headsets in your car in extreme temperatures. Direct sunlight and temperatures exceeding 110 degrees F can change the shape of the plastic parts of your headset, and extremely cold temperatures below 14 degrees F can diminish the battery life. Both extremes can negatively affect the operation of the headset.

• Keep your headset away from moisture. Wearing a headset in the rain or exposing it to excessive sweating can short out some of the electrical components of the headset. Wireless headsets are particularly susceptible to this problem.

• Avoid wrapping cords around the headset unit when storing. Over time this will weaken the cord and can cause the plastic covering around the wires to deteriorate. This is a common problem with corded headsets.

• Clean makeup, sweat, dirt, and hair products off your headset periodically, as headsets can get very dirty. If that dirt penetrates the outer casing of the unit, it can interfere with the operation of the headset. Use a damp cloth or alcohol-free wipes to gently clean it.

• Never pull on the cord of a corded headset to remove it from the device. Only remove the device directly at the adapter, or the cord might break off. Even a small amount of force repeated over time can cause the cord to gradually pull from the adapter and the interior wires to fray.